ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter TURBOCOR COMPRESSOR REPLACEMENT We carried out a Turbocor Compressor Replacement for one of our customers, all in-house. We found a Turbocor TT350 with failed Magnetic Bearings. We quoted the Supply of The Turbocor Replacement Compressor,...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter ROSS CHILLER CONTROLS RETROFIT A site in Central London had two Ross Comfort Cooling Water Chillers with failed controllers offering no cooling to some very posh flatts. We had all the parts in stock,...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter CHILLER FLOW RECOMMISSION We attended site for numerous Low Temp Chilled Water Trips on 3 Carrier Chillers of various capacities, all connected to a Low Loss Header with a Variable Secondary Chilled Water Flow;...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter LEAKY FRANKEN-FRIDGE We attended site to a Work Laboratory Cold Room for a large Pharmaceutical Company. The standby Chiller Unit had kicked in with our unit out on Low Pressure Safety. Investigations found a...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter Plate Heat Exchanger We attended a callout to a chiller in alarm, on arrival we found a system short of refrigerant. We carried out a full pressure test and could not find a leak,...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter Better than Manufacturer Controls Upgrade A Climaveneta Chiller had a failed controller which due to unsupported hardware required the replacement of the Master & Slave Controllers at great expense, so much so we costed...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter THE IMPORTANCE OF GOOD HEAT EXCHANGE A site where the Cooling Tower’s water was in a horrendous state due to a Total Dissolved Solids Controller being so out of kilter, it never carried out...
ROBUR AMMONIA ABSORPTION HEAT PUMP – 17 WAY VALVE WORKS We completed an ammonia seal kit replacement to a 17 Way Valve assembly on a Robur GAHP-AR Unit which had started to weep. The valve is used to configure the Robur unit for Cooling or Heating...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter BITZER INVERTER SCREW COMPRESSOR COMMISSIONING We have had the absolute pleasure in commissioning some Bitzer Inverter Screw compressors used in the Aermec Chiller range. Bitzer’s Service Tool; BEST is a brilliant interface to the...
ENJOYING THIS POST? Share it with your colleagues Share on linkedin LinkedIn Share on facebook Facebook Share on twitter Twitter LOWERING REFRIGERANT LEAK RATESThere seems to be a growing trend with modern Chiller Manufacturers to directly mount Pressure Relief Valves to suction and discharge lines. More-over to actually mount Dual Port Pressure Relief...